When using a predictive design tool, you have selected APs with an antenna gain 3 dBi and set the transmit
power of the predicted APs to 25 mW. What should be EIRP of the APs in the design?

What advantage provided by 802.11n and 802.11ac is not usable in 1X1:1 low-end client devices?

What are the deliverables to your customer after successfully implementing a WLAN infrastructure?

When surveying an existing WLAN infrastructure for a possible redesign, you use two Wi-Fi USB adapters to
collect RSSI data and two USB spectrum analysis adapters to collect RF spectrum data. Since your laptop
doesn’t have enough USB ports, you use a 4-port powered USB 3.0 hub. What issues could be caused by the use of USB 3.0 that will impact your site survey?

A business traveler from North America is in Europe. The hotel only provides coverage in 2.4 GHz. The
traveler connects to the hotel’s SSID and notices an AP in the hotel room. However, the laptop reports a very low RSSI when connected. The traveler does not have the same problem when connecting in the lobby. What would be the most likely cause of the low RSSI in the hotel room?

You’re preparing to perform a site survey for a company that processes meat. Some areas are restricted due to
high-security. What do you have to do in order to proceed with the site survey?

You have performed a validation site survey after deploying a WLAN infrastructure that is an
All-Wireless-Office. One specific application of your customer is experiencing delay when using the
application after moving from wired connectivity. After your validation, you realized that all APs are using 80
MHz channel-widths instead of 20 MHz on the 5 GHz band, as it was designed. What can be done to resolve
the delay on this application?

Your new customer is concerned about maintaining privacy for their proprietary information when you
conduct information gathering for their WLAN design. Which document can you use to directly address their
concern?