Why Buy HPE7-A03 Exam Dumps From Passin1Day?

Having thousands of HPE7-A03 customers with 99% passing rate, passin1day has a big success story. We are providing fully HP exam passing assurance to our customers. You can purchase HPE Aruba Networking Certified Network Architect - Campus Access exam dumps with full confidence and pass exam.

HPE7-A03 Practice Questions

Question # 1
What possible issue with the cote switch selection do you see in regards to the customers’ requirements?
A. The core switch will not support the 25GbE downlinks to the distribution switches.
B. The cote switch will have a lot of unused ports.
C. The cote switch will not have enough ports for VSX links.
D. The cote switch will not support the 10GbE downlinks to the cabins and technical rooms.


A. The core switch will not support the 25GbE downlinks to the distribution switches.

Explanation: In the scenario described, the most significant issue with the core switch selection, according to Aruba Campus Access learning resources, is answer A: "The core switch will not support the 25GbE downlinks to the distribution switches." This is a critical consideration because the bandwidth capabilities between the core and distribution layers significantly impact the overall network performance and scalability. If the core switch cannot support 25GbE downlinks, it may create a bottleneck, preventing the distribution switches from operating at their full capacity and affecting the performance of connected devices and applications. Ensuring the core switch has the necessary port speeds and densities to support the intended design and traffic patterns is crucial in network design, as emphasized in Aruba's documentation on campus network architectures.


Question # 2
A global cruise line company needs to refresh its current fleet. They win refresh the insides' of the ship to be cost-effective and increase their sustain ability. They Mill replace the complete WLAN/LAN hardware of the ship. In this refresh, the company will not refresh Us current security requirements. The CIO also wants to limit the number of unused ports in the switches. Future expansion will always mean a refresh of hardware. They start with the smallest ship with a maximum of 800 guests

Each ship has a LAN infrastructure consisting of two core switches, up to 10 redundant distribution switches, and up to 500 access switches (400 cabins. 100 technical rooms). The Core switches are located in the MDF of the ship and the distribution switches are located in the IDFs of the ship. Each cabin and technical room gets one single access switch.

The cabling structure of the ship will not be refreshed. Each IDF is connected to the MDF by SMF. of which two pairs are available for the interconnect between the core and distribution. The length of SM fiber between MDF and IDF is less than 300 meters (930 ft) and the type used is 0S1. Each cabin is connected by a single 0M2 pair to the IDF. the maximum length is 60 meters (200 ft). Each technical room is connected by a single 0M2 pail to the IDF. with lengths between 100 and 150 meters (320 and 500 ft).

For each cabin/technical room the customer is looking to replace their current fan-less 2530/2540 without changing the requirements, except they need to upgrade the uplink to distribution switch to 10GbEto handle the increased network traffic, and the technical rooms need redundant power.

The WLAN infrastructure will be 1:1 refreshed without new cabling or new AP locations. Their WLAN Infrastructure is based on the 200/300 series Indoor and outdoor APs running instantOS (less than 300 APs). the customer has no change in WLAN requirements.

The cruise line company will replace its current Internet connection before the LAN/WLAN refresh. The new Internet connection will provide a 99.8% uptime, which is needed to ensure the paid guest Wi-Fi is always operational. With this new internet connection, the CIO of the cruise line wants to base the design on the ESP architecture from Aruba because Internet connection is guaranteed.

Based on best practices, what should you recommend as the correct optic type for the connection between the IDF and the technical rooms?

A. Aruba 106 SFP- LC LRM 220 m MMF Transceiver
B. Aruba 106 SFP+ LC SR 300 m MMF Transceiver
C. Aruba 100 LC BID! 40 km-0 1330/1270 XCVR
D. Aruba 10GBASE-T SFP- RJ-45 30 m Cat6A Transceiver


B. Aruba 106 SFP+ LC SR 300 m MMF Transceiver

Explanation: For the connection between the IDF and the technical rooms, which requires support for lengths between 100 and 150 meters (320 and 500 ft), the Aruba 10G SFP+ LC SR 300 m MMFTransceiver is the recommended optic type. This transceiver is designed for short-range multimode fiber connections and can support distances up to 300 meters, making it suitable for the specified lengths within the technical rooms on the cruise ship. The SR (Short Range) designation ensures that this transceiver is optimized for the distances involved in connecting the IDFs to the technical rooms, providing high-speed 10GbE connectivity to meet the increased network traffic demands. This choice aligns with the cruise line company's requirements for a sustainable and cost-effective network refresh that accommodates future expansion without extensive unused capacities.


Question # 3
when is o Mode Conditioning Patch Cable required?
A. A1000Base-LX Transceiver is operated with 62.5/125 cables up to 500 m.
B. A1000Base-SX Transceiver is operated with 62.5/125 cables up to 500 m.
C. A10GBase-LXd Transceiver Is operated with 62.5/125 cables up to 2 km.
D. A10GBase-lR Transceiver is operated with 62 5/125 cables up to 500 m


A. A1000Base-LX Transceiver is operated with 62.5/125 cables up to 500 m.

Explanation: Mode Conditioning Patch Cables (MCPs) are used in situations where long wavelength laser transceivers, such as the 1000Base-LX, are deployed over multimode fiber types like the 62.5/125 µm. The 1000Base-LX transceivers are designed primarily for use with single-mode fiber, but they can operate over multimode fiber using an MCP. The MCP is necessary because the core size of multimode fiber (62.5/125 µm) is significantly larger than that of single-mode fiber, which can lead to modal dispersion when a single-mode laser signal enters the multimode fiber. This dispersion can degrade the signal quality over longer distances. The MCP mitigates this issue by aligning the single-mode laser output from the transceiver to a specific launch point in the multimode fiber, thus minimizing dispersion and allowing for effective data transmission over distances up to 500 meters.


Question # 4
You ate presenting your network design solution to your customer. What Is important to include in your presentation?
A. protocols that will be used to make your solution work
B. your rollback plan
C. your experience with this kind of project
D. tangible and intangible returns for the customer


D. tangible and intangible returns for the customer



Question # 5
A large multinational financial institution has contracted you to design a new full-stack wired and wireless network for their new 6-story regional office building. The bottom two floors of this facility will be retail space for a large banking branch. The upper floors will be carpeted office space for corporate users, each floor being approximately 100.000 sq ft (9290 sqm). Data centers are all off site and will be out of scope for this project. The customer is underserved by its existing L2-based network infrastructure and would like to take advantage of modern best practices in the new design. The network should be fully resilient and fault-tolerant, with dynamic segmentation at the edge.

The retail space will include public guest Wi-Fi access. Retail associates will have corporate tablets for customer service, and there will be a mix of wired and wireless devices throughout the retail floors. The corporate users will primarily use wireless for connectivity, but several wired clients, printers, and hard VoIP phones will be in use.

The customer is also planning on renovating the corporate office space in order to take advantage of "smart office' technology. These improvements will drive blue-dot wayfinding. presence analytics, and other location-based services

The client would take to ensure redundant RADIUS resources in each of their three geographical regions (AMER. EMEA. and APAC) A large office location Is available In each region with sufficient VMware resources available.

- Each region has 5.000 clients, all of which will need to do either 802.1 x wired or wireless authentications as well as 802.1 x authentication for a single personal device on Wi-Fi.

• All of the non-personal devices will also need to validate health with a local agent.
• A total of 500 guests are expected to be connected on average with a maximum of 700 simultaneous connections making use of Guest Portal for access to the Internet.
• TACACS authentication will also be configured for a total of 1,200 evenly dispersed NADs.
In order to support virtual IPs and server redundancy in each region how many Virtual Policy Manager Licenses will be needed?
A. six licenses. C3000V
B. six licenses. C2000V
C. three licenses. C3000V
D. three licenses. C2000V


A. six licenses. C3000V

Explanation: In a scenario requiring redundant RADIUS resources across three geographical regions, with the scale of operations as described, opting for six C3000V Virtual Policy Manager licenses would ensure adequate capacity and redundancy. The C3000V model is designed to cater to larger deployments, offering high-capacity RADIUS services suitable for environments with thousands of clients and devices requiring authentication and health validation. By deploying two C3000V instances in each region (AMER, EMEA, and APAC), the financial institution can achieve both high availability and load balancing, ensuring that authentication services remain uninterrupted and efficient, even in the event of a server failure or during maintenance periods. This approach aligns with best practices for enterprise network design, emphasizing resilience and reliability in critical infrastructure components like authentication services.


Question # 6
ACME retail has 38 locations spread out across Ave US states and two provinces in Canada. They are looking to grow 20% over the next two years. They have an HO with a staff of 200 employees. The organization has eight Regional Managers and two VPs who work from home and the road. Stores typically have 17 employees on average per location.

The two warehouses have a remote loading system and 20 employees each to load the trucks and fulfill the online orders. The warehouse has 40-foot ceilings and large metal racks to store inventory. The main location is 240K sq ft (22300 st) m) and the Canadian warehouse Is 130K sq ft (12100 sq ml. The forkllfts on the loading docks are equipped with a wireless tablet on board.

A typical store Is reportedly about 60.000 sq ft (5575 sqm) and smaller stores are planned at 25.000 sq ft '2320 sq mi. The locations need to expand the abilities to vendors that need to add setup displays or Interactive kiosks in the stores. The current Infrastructure was installed In 2015 and used wireless N technology in a coverage model. The wiring is CatS. and they are unsure of the fiber connections. The inventory is all placed on the floor when it is delivered to the local store.

Inventory control is handled through Zebra barcode scanners, and they have had a lot of issues in getting signals throughout the stores and this makes monthly inventory difficult. The organization has a small help desk to troubleshoot issues that happen at the retail locations and PC support for the office. The company is looking to upgrade away from the current pbx system later this year. With the need to grow and cut costs, they are interested in moving the data to the cloud but need to get almost real-time inventory control for the online service to function.

The network has all been wired over the last ten years, but with the new systems being all wireless, they have seen the trend to offer wireless to all the vendors for their needs but also would like to allow employees, guests, and contractors all to use it. With the new IT director starting next week, the project has been set by the CTO of the company. The marketing group has asked how they can interact with the customers and get more info, while the IT support desk needs to cut staff in halt.

The. office has an MDF and two IDFs located on floors one and two. The HOF is in the basement, and you have multiple WAN circuits for the HO links. Each store has a local handoff from the cable company (ethernet) In the middle of the store in the office, so distance for the wiring is not an issue.

The customer has budget concerns but does want something that could last 7+ years.

Based on the best practices and customer requirements, what is the correct WLAN approach?
A. Aruba OS10 AP and gateway deployment
B. Instant OS 8 deployment
C. Aruba OS10 AP only deployment
D. Aruba OS8 campus deployment


B. Instant OS 8 deployment

Explanation: For ACME Retail, which has multiple locations and a mix of environments including high-ceiling warehouses and retail spaces, an Aruba Instant OS 8 deployment is a suitable WLAN approach. Aruba Instant OS provides a controller-less architecture, which simplifies the deployment and management of the wireless network, especially across multiple sites. This approach enables ACME Retail to manage their entire wireless network from a single interface without the need for dedicated hardware controllers, reducing costs and complexity. Instant OS also supports advanced features like Adaptive Radio Management and ClientMatch to ensure optimal performance in diverse environments, making it an effective solution for ACME's varied locations and requirements.


Question # 7
ACME retail has 38 locations spread out across Ave US states and two provinces in Canada. They are looking to grow 20% over the next two years. They have an HO with a staff of 200 employees. The organization has eight Regional Managers and two VPs who work from home and the road. Stores typically have 17 employees on average per location.

The two warehouses have a remote loading system and 20 employees each to load the trucks and fulfill the online orders. The warehouse has 40-foot ceilings and large metal racks to store inventory. The main location is 240K sq ft (22300 st) m) and the Canadian warehouse Is 130K sq ft (12100 sq ml. The forkllfts on the loading docks are equipped with a wireless tablet on board.

A typical store Is reportedly about 60.000 sq ft (5575 sqm) and smaller stores are planned at 25.000 sq ft '2320 sq mi. The locations need to expand the abilities to vendors that need to add setup displays or Interactive kiosks in the stores. The current Infrastructure was installed In 2015 and used wireless N technology in a coverage model. The wiring is CatS. and they are unsure of the fiber connections. The inventory is all placed on the floor when it is delivered to the local store.

Inventory control is handled through Zebra barcode scanners, and they have had a lot of issues in getting signals throughout the stores and this makes monthly inventory difficult. The organization has a small help desk to troubleshoot issues that happen at the retail locations and PC support for the office. The company is looking to upgrade away from the current pbx system later this year. With the need to grow and cut costs, they are interested in moving the data to the cloud but need to get almost real-time inventory control for the online service to function.

The network has all been wired over the last ten years, but with the new systems being all wireless, they have seen the trend to offer wireless to all the vendors for their needs but also would like to allow employees, guests, and contractors all to use it. With the new IT director starting next week, the project has been set by the CTO of the company. The marketing group has asked how they can interact with the customers and get more info, while the IT support desk needs to cut staff in halt.

The. office has an MDF and two IDFs located on floors one and two. The HOF is in the basement, and you have multiple WAN circuits for the HO links. Each store has a local handoff from the cable company (ethernet) In the middle of the store in the office, so distance for the wiring is not an issue.

The customer has budget concerns but does want something that could last 7+ years.

What are two primary concerns of the Stakeholder' (Select two.)
A. cost of solution
B. future proof
C. ease of access
D. expansion


A. cost of solution
B. future proof

Explanation: For the stakeholders at ACME Retail, the primary concerns include the cost of the solution and ensuring that the solution is future-proof. Given the company's budget concerns, it is crucial that the chosen network infrastructure offers a good return on investment and aligns with their financial constraints. At the same time, considering the company's growth plans and the rapid evolution of technology, the solution must be scalable and adaptable to future needs. This involves selecting networking equipment and technologies that can support emerging trends, such as increased wireless device usage, cloud computing, and advanced security requirements, without necessitating frequent, costly upgrades. Balancing these concerns will help ACME Retail achieve its operational goals while positioning itself for sustainable growth and innovation.


Question # 8
What is one use case for designing a 2-tier campus LAM instead of using a 3-tier?
A. The campus has small buildings with only a few wiring closets.
B. The network has grown beyond a few building aggregation points
C. Access aggregation points are not scaling to meet traffic demands.
D. Cross-campus traffic has grown beyond We capacity of a single collapsed core


A. The campus has small buildings with only a few wiring closets.



HPE7-A03 Dumps
  • Up-to-Date HPE7-A03 Exam Dumps
  • Valid Questions Answers
  • HPE Aruba Networking Certified Network Architect - Campus Access PDF & Online Test Engine Format
  • 3 Months Free Updates
  • Dedicated Customer Support
  • Aruba Certified Professional-Campus Access Pass in 1 Day For Sure
  • SSL Secure Protected Site
  • Exam Passing Assurance
  • 98% HPE7-A03 Exam Success Rate
  • Valid for All Countries

HP HPE7-A03 Exam Dumps

Exam Name: HPE Aruba Networking Certified Network Architect - Campus Access
Certification Name: Aruba Certified Professional-Campus Access

HP HPE7-A03 exam dumps are created by industry top professionals and after that its also verified by expert team. We are providing you updated HPE Aruba Networking Certified Network Architect - Campus Access exam questions answers. We keep updating our Aruba Certified Professional-Campus Access practice test according to real exam. So prepare from our latest questions answers and pass your exam.

  • Total Questions: 70
  • Last Updation Date: 21-Oct-2024

Up-to-Date

We always provide up-to-date HPE7-A03 exam dumps to our clients. Keep checking website for updates and download.

Excellence

Quality and excellence of our HPE Aruba Networking Certified Network Architect - Campus Access practice questions are above customers expectations. Contact live chat to know more.

Success

Your SUCCESS is assured with the HPE7-A03 exam questions of passin1day.com. Just Buy, Prepare and PASS!

Quality

All our braindumps are verified with their correct answers. Download Aruba Certified Professional-Campus Access Practice tests in a printable PDF format.

Basic

$80

Any 3 Exams of Your Choice

3 Exams PDF + Online Test Engine

Buy Now
Premium

$100

Any 4 Exams of Your Choice

4 Exams PDF + Online Test Engine

Buy Now
Gold

$125

Any 5 Exams of Your Choice

5 Exams PDF + Online Test Engine

Buy Now

Passin1Day has a big success story in last 12 years with a long list of satisfied customers.

We are UK based company, selling HPE7-A03 practice test questions answers. We have a team of 34 people in Research, Writing, QA, Sales, Support and Marketing departments and helping people get success in their life.

We dont have a single unsatisfied HP customer in this time. Our customers are our asset and precious to us more than their money.

HPE7-A03 Dumps

We have recently updated HP HPE7-A03 dumps study guide. You can use our Aruba Certified Professional-Campus Access braindumps and pass your exam in just 24 hours. Our HPE Aruba Networking Certified Network Architect - Campus Access real exam contains latest questions. We are providing HP HPE7-A03 dumps with updates for 3 months. You can purchase in advance and start studying. Whenever HP update HPE Aruba Networking Certified Network Architect - Campus Access exam, we also update our file with new questions. Passin1day is here to provide real HPE7-A03 exam questions to people who find it difficult to pass exam

Aruba Certified Professional-Campus Access can advance your marketability and prove to be a key to differentiating you from those who have no certification and Passin1day is there to help you pass exam with HPE7-A03 dumps. HP Certifications demonstrate your competence and make your discerning employers recognize that HPE Aruba Networking Certified Network Architect - Campus Access certified employees are more valuable to their organizations and customers.


We have helped thousands of customers so far in achieving their goals. Our excellent comprehensive HP exam dumps will enable you to pass your certification Aruba Certified Professional-Campus Access exam in just a single try. Passin1day is offering HPE7-A03 braindumps which are accurate and of high-quality verified by the IT professionals.

Candidates can instantly download Aruba Certified Professional-Campus Access dumps and access them at any device after purchase. Online HPE Aruba Networking Certified Network Architect - Campus Access practice tests are planned and designed to prepare you completely for the real HP exam condition. Free HPE7-A03 dumps demos can be available on customer’s demand to check before placing an order.


What Our Customers Say