Question # 1 You have just increased the MTU size of interface ge-0/0/0 and committed the configuration.
Which command would help you identify the applied MTU change? A. monitor interface ge-0/0/0B. monitor traffic interface ge-0/0/0C. show interfaces ge-0/0/0 terseD. show interfaces ge-0/0/0
Click for Answer
D. show interfaces ge-0/0/0
Answer Description Explanation:
After increasing the MTU size of an interface and committing the configuration, the command to verify the applied MTU change is D, "show interfaces ge-0/0/0." This command displays detailed information about the interface, including the current MTU size, making it the best choice for verifying the applied changes.
Question # 2 Which service does RADIUS provide? A. routingB. authenticationC. DNS resolutionD. time synchronization
Click for Answer
B. authentication
Answer Description Explanation:
RADIUS, which stands for Remote Authentication Dial-In User Service, provides authentication services for users trying to access a network. It is a networking protocol that provides centralized Authentication, Authorization, and Accounting (AAA) management for users who connect and use a network service.
Question # 3 You need to recover the root password on a Junos router without losing the current configuration settings.
Which three statements describe what you should perform in this scenario? (Choose three.) A. Enter and commit the new root password.B. Load the factory-default configuration.C. Upgrade the Junos OS to the latest version.D. Hit the space bar and enter recovery when prompted.E. Use a console connection to reboot the device.
Click for Answer
A. Enter and commit the new root password.D. Hit the space bar and enter recovery when prompted.E. Use a console connection to reboot the device.
Answer Description Explanation:
To recover the root password on a Junos router without losing the configuration, you should (A) enter and commit the new root password once you have gained access to the system, (D) hit the space bar to interrupt the boot process and enter recovery mode when prompted during the boot process, and (E) use a console connection to reboot the device and access the bootloader prompt. These steps allow you to reset the root password while preserving the existing configuration.
Question # 4 You are asked to convert the number 7 from decimal to binary.
Which number is correct in this scenario? A. 00001000B. 00010000C. 00000111D. 11100000
Click for Answer
C. 00000111
Answer Description Explanation:
To convert the decimal number 7 to binary, the correct representation is 00000111 (C). In binary, 7 is represented as 1+2+4 (2^0 + 2^1 + 2^2), which corresponds to the last three digits being 1 in the binary format, with leading zeros added for clarity.
Question # 5 Your router has a route to the 10.1.1.0/24 network with a next hop of r jet.
In this scenario, which action will your router perform when traffic destined to the 10.1.1.0/24 network is received? A. The traffic will be discarded and an ICMP unreachable message will be sent to the destination of the traffic.B. The traffic will be discarded and an ICMP unreachable message will be sent to the source of the traffic.C. The traffic will be redirected using a default route.D. The traffic will be silently discarded.
Click for Answer
D. The traffic will be silently discarded.
Answer Description Explanation:
In a scenario where a router has a route to a specific network (in this case, 10.1.1.0/24) with a next hop that is unreachable or incorrectly specified (e.g., "r jet" seems to be a typo or an undefined entity), the router will typically discard the traffic destined for that network. This action is taken because the router cannot determine a valid path to forward the traffic. Unlike some scenarios where the router might generate an ICMP (Internet Control Message Protocol) unreachable message, in many configurations, especially in production networks, the traffic might be silently discarded without providing feedback to the sender, as generating ICMP messages for all undeliverable packets could lead to additional network congestion and potential security concerns.
Question # 6 You received a new Junos device and are configuring the system-related settings. You must configure this device for the current date and time on the US West coast. You have set the time zone to America/Los_Angeies. however the time and date did not change.
In this scenario, which two additional actions would satisfy this requirement? (Choose two.) A. Set the date and time setting manually.B. Configure an NTP server.C. Configure a DNS server.D. Reboot the device.
Click for Answer
A. Set the date and time setting manually.B. Configure an NTP server.
Answer Description Explanation:
When configuring the system-related settings for the current date and time on a Junos device, especially for a specific time zone like America/Los_Angeles, and the time does not automatically adjust, two effective actions can be taken. Firstly, setting the date and time manually allows for immediate correction of the system clock. This can be done via the CLI with the appropriate set date and time command. Secondly, configuring the device to use an NTP server can provide ongoing synchronization with an accurate time source, ensuring that the device maintains the correct time and date automatically in the future, even in the case of restarts or minor drifts in the internal clock.
Question # 7 What are two functions of the routing protocol daemon (rpd)? (Choose two.) A. It generates chassis alarms.B. It provides access to the CLI.C. It creates forwarding tables.D. It maintains routing tables.
Click for Answer
C. It creates forwarding tables.D. It maintains routing tables.
Answer Description Explanation:
The Routing Protocol Daemon (rpd) is a critical component in Juniper Networks devices, responsible for all routing operations. It maintains routing tables, which hold information about network paths and destinations derived from various routing protocols. These tables are used to make decisions about where to send packets. Additionally, rpd generates forwarding tables based on the information in the routing tables. The forwarding tables are then used by the Packet Forwarding Engine (PFE) to actually forward packets to their next hop or final destination.
Question # 8 An administrator configures a router's interface with an IPv4 address and subnet mask. The administrator also confirms that this interface is in an up state.
In this scenario, which two route types are created on the local router? (Choose two.) A. a static routeB. a local routeC. a dynamic routeD. a direct route
Click for Answer
B. a local routeD. a direct route
Answer Description When an interface on a router is configured with an IPv4 address and is in an up state, two types of routes are automatically created in the routing table: a local route and a direct route, making B and D the correct answers. The local route represents the interface's IP address itself, indicating that the router can directly receive packets addressed to this IP. The direct route represents the subnet or network segment to which the interface is connected, indicating that the router can directly forward packets to destinations within this subnet.
Up-to-Date
We always provide up-to-date JN0-105 exam dumps to our clients. Keep checking website for updates and download.
Excellence
Quality and excellence of our Junos - Associate (JNCIA-Junos) practice questions are above customers expectations. Contact live chat to know more.
Success
Your SUCCESS is assured with the JN0-105 exam questions of passin1day.com. Just Buy, Prepare and PASS!
Quality
All our braindumps are verified with their correct answers. Download JNCIA Practice tests in a printable PDF format.
Basic
$80
Any 3 Exams of Your Choice
3 Exams PDF + Online Test Engine
Buy Now
Premium
$100
Any 4 Exams of Your Choice
4 Exams PDF + Online Test Engine
Buy Now
Gold
$125
Any 5 Exams of Your Choice
5 Exams PDF + Online Test Engine
Buy Now
Passin1Day has a big success story in last 12 years with a long list of satisfied customers.
We are UK based company, selling JN0-105 practice test questions answers. We have a team of 34 people in Research, Writing, QA, Sales, Support and Marketing departments and helping people get success in their life.
We dont have a single unsatisfied Juniper customer in this time. Our customers are our asset and precious to us more than their money.
JN0-105 Dumps
We have recently updated Juniper JN0-105 dumps study guide. You can use our JNCIA braindumps and pass your exam in just 24 hours. Our Junos - Associate (JNCIA-Junos) real exam contains latest questions. We are providing Juniper JN0-105 dumps with updates for 3 months. You can purchase in advance and start studying. Whenever Juniper update Junos - Associate (JNCIA-Junos) exam, we also update our file with new questions. Passin1day is here to provide real JN0-105 exam questions to people who find it difficult to pass exam
JNCIA can advance your marketability and prove to be a key to differentiating you from those who have no certification and Passin1day is there to help you pass exam with JN0-105 dumps. Juniper Certifications demonstrate your competence and make your discerning employers recognize that Junos - Associate (JNCIA-Junos) certified employees are more valuable to their organizations and customers. We have helped thousands of customers so far in achieving their goals. Our excellent comprehensive Juniper exam dumps will enable you to pass your certification JNCIA exam in just a single try. Passin1day is offering JN0-105 braindumps which are accurate and of high-quality verified by the IT professionals. Candidates can instantly download JNCIA dumps and access them at any device after purchase. Online Junos - Associate (JNCIA-Junos) practice tests are planned and designed to prepare you completely for the real Juniper exam condition. Free JN0-105 dumps demos can be available on customer’s demand to check before placing an order.
What Our Customers Say
Jeff Brown
Thanks you so much passin1day.com team for all the help that you have provided me in my Juniper exam. I will use your dumps for next certification as well.
Mareena Frederick
You guys are awesome. Even 1 day is too much. I prepared my exam in just 3 hours with your JN0-105 exam dumps and passed it in first attempt :)
Ralph Donald
I am the fully satisfied customer of passin1day.com. I have passed my exam using your Junos - Associate (JNCIA-Junos) braindumps in first attempt. You guys are the secret behind my success ;)
Lilly Solomon
I was so depressed when I get failed in my Cisco exam but thanks GOD you guys exist and helped me in passing my exams. I am nothing without you.