Black Friday

Why Buy NSK200 Exam Dumps From Passin1Day?

Having thousands of NSK200 customers with 99% passing rate, passin1day has a big success story. We are providing fully Netskope exam passing assurance to our customers. You can purchase Netskope Certified Cloud Security Integrator (NCCSI) exam dumps with full confidence and pass exam.

NSK200 Practice Questions

Question # 1
You are having issues with fetching user and group Information periodically from the domain controller and posting that information to your tenant instance in the Netskope cloud. To begin the troubleshooting process, what would you Investigate first in this situation?
A. On-Premises Log Parser
B. Directory Importer
C. DNS Connector
D. AD Connector


B. Directory Importer

Explanation:

The Directory Importer is a component of the Netskope Adapters that connects to the domain controller and periodically fetches user and group information to post that info to your tenant instance in the Netskope cloud1. If you are having issues with this process, the first thing you should investigate is the Directory Importer itself. You can check the status of the Directory Importer service, the configuration file, the logs, and the connectivity to the domain controller and the Netskope cloud2. Therefore, option B is correct and the other options are incorrect. References: Configure Directory Importer - Netskope Knowledge Portal, Troubleshooting Directory Importer - Netskope Knowledge Portal

Question # 2
You are using the Netskope DLP solution. You notice flies containing test data for credit cards are not triggering DLP events when uploaded to Dropbox. There are corresponding page events. Which two scenarios would cause this behavior? (Choose two.)
A. The Netskope client Is not steering Dropbox traffic.
B. The DLP rule has the severity threshold set to a value higher than the number of occurrences.
C. The credit card numbers in your test data are Invalid 16-dlglt numbers.
D. There is no API protection configured for Dropbox.


B. The DLP rule has the severity threshold set to a value higher than the number of occurrences.
C. The credit card numbers in your test data are Invalid 16-dlglt numbers.

Explanation:

There are two possible scenarios that would cause the behavior of files containing test data for credit cards not triggering DLP events when uploaded to Dropbox. One scenario is that the DLP rule has the severity threshold set to a value higher than the number of occurrences. This means that the rule will only trigger an event if the number of matches for the sensitive data exceeds the specified threshold. For example, if the rule has a severity threshold of 10 and the file contains only 5 credit card numbers, then no event will be generated. To fix this, you can lower the severity threshold or remove it altogether. The other scenario is that the credit card numbers in your test data are invalid 16-digit numbers.

This means that the numbers do not pass the Luhn algorithm check, which is a validation method used by Netskope DLP to detectvalid credit card numbers. For example, if the number is 1234-5678-9012-3456, then it is not a valid credit card number and will not be detected by Netskope DLP. To fix this, you can use valid test credit card numbers that pass the Luhn algorithm check. The other options are not valid scenarios for this behavior. The Netskope client is not steering Dropbox traffic is not a valid scenario because there are corresponding page events, which means that the traffic is being steered to Netskope. There is no API protection configured for Dropbox is not a valid scenario because API protection is not required for DLP detection on file uploads, which are handled by real-time protection. References: DLP Rule Settings1, Credit Card Number Detection2


Question # 3
Your organization has three main locations with 30.000 hosts in each location. You are planning to deploy Netskope using iPsec tunnels for security. What are two considerations to make a successful connection in this scenario? (Choose two.)
A. browsers in use
B. operating systems
C. redundant POPs
D. number of hosts


C. redundant POPs
D. number of hosts

Explanation:

To deploy Netskope using IPSec tunnels for security in this scenario, two considerations to make a successful connection are C. redundant POPs and D. number of hosts. Redundant POPs are Points of Presence that are geographically distributed data centers that host the Netskope cloud platform. You need to consider redundant POPs to ensure high availability and resiliency of your IPSec tunnels in case of a failure or outage in one of the POPs. You can configure multiple IPSec tunnels from your network to different POPs and use dynamic routing protocols such as BGP to load balance and failover the traffic1. Number of hosts is the number of devices or endpoints that will use the IPSec tunnels to access the cloud services. You need to consider the number of hosts to estimate the bandwidth and throughput requirements of your IPSec tunnels and choose the appropriate POPs that can handle the traffic volume. You can use the Netskope Bandwidth Calculator tool to estimate the bandwidth and throughput based on the number of hosts, locations, and cloud services2. Therefore, options C and D are correct and the other options are incorrect. References: IPSec - Netskope Knowledge Portal, Netskope Bandwidth Calculator

Question # 4
The risk team at your company has determined that traffic from the sales team to a custom Web application should not be inspected by Netskope. All other traffic to the Web application should continue to be inspected. In this scenario, how would you accomplish this task?
A. Create a Do Not Decrypt Policy using User Group and Domainin the policy page.
B. Create a Do Not Decrypt Policy using Application in the policy page and a Steering Exception for Group
C. Create a Do Not Decrypt Policy using Destination IP and Application in the policy page.
D. Create a Do Not Decrypt Policy using Source IP and Application in the policy page.


A. Create a Do Not Decrypt Policy using User Group and Domainin the policy page.

Explanation:

To prevent traffic from the sales team to a custom Web application from being inspected by Netscape, you need to create a Do Not Decrypt Policy using User Group and Domain in the policy page. A Do Not Decrypt Policy allows you to specify the traffic you want to leave encrypted and not further analyzed by Netskope via the Real-time Protection policies3. You can use the User Group criteria to match the sales team members and the Domain criteria to match the custom Web application. This way, only the traffic from the sales team to the custom Web application will be exempted from decryption, while all other traffic to the Web application will continue to be inspected.

Question # 5
Netskope is being used as a secure Web gateway. Your organization's URL list changes frequently. In this scenario, what makes It possible for a mass update of the URL list in the Netskope platform?
A. REST API v2
B. Assertion Consumer Service URL
C. Cloud Threat Exchange
D. SCIM provisioning


A. REST API v2

Explanation:

The method that makes it possible for a mass update of the URL list in the Netskope platform is A. REST API v2. REST API v2 is a feature that allows you to use an auth token to make authorized calls to the Netskope API and access resources via URI paths5. You can use REST API v2 to update a URL list with new values by providing the name of an existing URL list and a comma-separated list of URLs or IP addresses6. This can help you automate or script the management of your URL lists and keep them up-to-date. Therefore, option A is correct and the other options are incorrect. References: REST API v2 Overview - Netskope Knowledge Portal, Update a URL List - Netskope Knowledge Portal

Question # 6
After deploying the Netskope client to a number of devices, users report that the Client status indicates "Admin Disabled". User and gateway information is displayed correctly in the client configuration dialog Why are clients installing in an "Admin Disabled" state in this scenario?
A. All devices were previously disabled by the administrator.
B. The user's identity is not synchronized to Netskope.
C. The user's password was incorrect during enrollment.
D. The user's account has no mail ID attribute In Active Directory.


A. All devices were previously disabled by the administrator.

Explanation:

The Netskope client can be disabled by the administrator from the Netskope console. This is useful for troubleshooting or maintenance purposes. When the client is disabled by the administrator, it shows the status as “Admin Disabled” and does not apply any policies or steer any traffic. The user cannot enable the client unless the administrator enables it from the console. The other options are not valid reasons for the client to be in an “Admin Disabled” state. References: Netskope Client Status 1, Enable or Disable Netskope Client 2

Question # 7
Your company has a Symantec BlueCoat proxy on-premises and you want to deploy Netskope using proxy chaining. Which two prerequisites need to be enabled first in this scenario? (Choose two.)
A. Disable SSL decryption.
B. Disable the X-Authenticated-User header.
C. Enable SSL decryption.
D. Enable the X-Forwarded-For HTTP header


C. Enable SSL decryption.
D. Enable the X-Forwarded-For HTTP header

Explanation:

To deploy Netskope using proxy chaining with Symantec BlueCoat proxy on-premises, you need to enable two prerequisites first: Enable SSL decryption on your Symantec BlueCoat proxy. This is required for proxy chaining because Netskope needs to inspect the SSL traffic that is sent from your proxy to the Netskope cloud. To enable SSL decryption, you need to configure your Symantec BlueCoat proxy to trust the Netskope certificate for SSL interception. You can download the certificate from Settings > Manage > Certificates > Signing CA in the Netskope UI. Enable the X-Forwarded-For HTTP header on your Symantec BlueCoat proxy.

This is required for proxy chaining because Netskope needs to identify the original source IP address of the user behind your proxy. The X-Forwarded-For header is used to pass this information from your proxy to Netskope. To enable this header, you need to configure your Symantec BlueCoat proxy to send X-Forwarded-For HTTP header for all HTTP requests. The other options are not valid prerequisites for this scenario. You do not need to disable SSL decryption on your Symantec BlueCoat proxy, as this would prevent Netskope from inspecting the SSL traffic. You do not need to disable the X-Authenticated-User header on your Symantec BlueCoat proxy, as this is an optional header that can be used to pass additional user information from your proxy to Netskope.

References: Proxy Chaining3, Configure Forcepoint for Proxy Chaining

Question # 8
The director of IT asks for confirmation If your organization's Web traffic would be blocked when the Netskope client fails. In this situation, what would confirm the fail close status?

A. Perform a right-click on the Netskope client icon using your mouse.
B. Review the nsdebuglog.log.
C. View Application events.
D. Review user settings.


B. Review the nsdebuglog.log.

Explanation:

The method that would confirm the fail close status is B. Review the nsdebuglog.log. The nsdebuglog.log is a log file that contains information about the Netskope client’s status, configuration, events, errors, etc. You can review the nsdebuglog.log file to confirm the fail close status by looking for a line that says “failCloseStatus”:“1”. This indicates that the fail close option is enabled for the Netskope client4. The fail close option is a feature that allows you to block all web traffic when the Netskope client fails or loses connection to the Netskope cloud5. Therefore, option B is correct and the other options are incorrect. References: Troubleshooting Netskope Client - Netskope Knowledge Portal, Client Configuration - Netskope Knowledge Portal

NSK200 Dumps
  • Up-to-Date NSK200 Exam Dumps
  • Valid Questions Answers
  • Netskope Certified Cloud Security Integrator (NCCSI) PDF & Online Test Engine Format
  • 3 Months Free Updates
  • Dedicated Customer Support
  • NCCSI Pass in 1 Day For Sure
  • SSL Secure Protected Site
  • Exam Passing Assurance
  • 98% NSK200 Exam Success Rate
  • Valid for All Countries

Netskope NSK200 Exam Dumps

Exam Name: Netskope Certified Cloud Security Integrator (NCCSI)
Certification Name: NCCSI

Netskope NSK200 exam dumps are created by industry top professionals and after that its also verified by expert team. We are providing you updated Netskope Certified Cloud Security Integrator (NCCSI) exam questions answers. We keep updating our NCCSI practice test according to real exam. So prepare from our latest questions answers and pass your exam.

  • Total Questions: 93
  • Last Updation Date: 22-Nov-2024

PDF Price

$19.99
$55.99 Updates:

Engine Price

$25.99
$73.99 Updates:

PDF + Engine

$29.99
$84.99 Updates:


Up-to-Date

We always provide up-to-date NSK200 exam dumps to our clients. Keep checking website for updates and download.

Excellence

Quality and excellence of our Netskope Certified Cloud Security Integrator (NCCSI) practice questions are above customers expectations. Contact live chat to know more.

Success

Your SUCCESS is assured with the NSK200 exam questions of passin1day.com. Just Buy, Prepare and PASS!

Quality

All our braindumps are verified with their correct answers. Download NCCSI Practice tests in a printable PDF format.

Basic

$80

Any 3 Exams of Your Choice

3 Exams PDF + Online Test Engine

Buy Now
Premium

$100

Any 4 Exams of Your Choice

4 Exams PDF + Online Test Engine

Buy Now
Gold

$125

Any 5 Exams of Your Choice

5 Exams PDF + Online Test Engine

Buy Now

About Us

Passin1Day has a big success story in last 12 years with a long list of satisfied customers.

We are UK based company, selling NSK200 practice test questions answers. We have a team of 34 people in Research, Writing, QA, Sales, Support and Marketing departments and helping people get success in their life.

We dont have a single unsatisfied Netskope customer in this time. Our customers are our asset and precious to us more than their money.

WE FEEL SATISFIED WHEN YOU GET SATISFIED!

NSK200 Dumps

We have recently updated Netskope NSK200 dumps study guide. You can use our NCCSI braindumps and pass your exam in just 24 hours. Our Netskope Certified Cloud Security Integrator (NCCSI) real exam contains latest questions. We are providing Netskope NSK200 dumps with updates for 3 months. You can purchase in advance and start studying. Whenever Netskope update Netskope Certified Cloud Security Integrator (NCCSI) exam, we also update our file with new questions. Passin1day is here to provide real NSK200 exam questions to people who find it difficult to pass exam

NCCSI can advance your marketability and prove to be a key to differentiating you from those who have no certification and Passin1day is there to help you pass exam with NSK200 dumps. Netskope Certifications demonstrate your competence and make your discerning employers recognize that Netskope Certified Cloud Security Integrator (NCCSI) certified employees are more valuable to their organizations and customers.


We have helped thousands of customers so far in achieving their goals. Our excellent comprehensive Netskope exam dumps will enable you to pass your certification NCCSI exam in just a single try. Passin1day is offering NSK200 braindumps which are accurate and of high-quality verified by the IT professionals.

Candidates can instantly download NCCSI dumps and access them at any device after purchase. Online Netskope Certified Cloud Security Integrator (NCCSI) practice tests are planned and designed to prepare you completely for the real Netskope exam condition. Free NSK200 dumps demos can be available on customer’s demand to check before placing an order.


What Our Customers Say

Testimonial

Jeff Brown

Thanks you so much passin1day.com team for all the help that you have provided me in my Netskope exam. I will use your dumps for next certification as well.
Testimonial

Mareena Frederick

You guys are awesome. Even 1 day is too much. I prepared my exam in just 3 hours with your NSK200 exam dumps and passed it in first attempt :)
Testimonial

Ralph Donald

I am the fully satisfied customer of passin1day.com. I have passed my exam using your Netskope Certified Cloud Security Integrator (NCCSI) braindumps in first attempt. You guys are the secret behind my success ;)
Testimonial

Lilly Solomon

I was so depressed when I get failed in my Cisco exam but thanks GOD you guys exist and helped me in passing my exams. I am nothing without you.