Why Buy 300-410 Exam Dumps From Passin1Day?

Name: 300-410 Dumps
SKU: 300-410 Dumps
Price: 35.99 USD
Availability: InStock
Rating: 5.0 (575 reviews)

Having thousands of 300-410 customers with 99% passing rate, passin1day has a big success story. We are providing fully Cisco exam passing assurance to our customers. You can purchase Implementing Cisco Enterprise Advanced Routing and Services (300-410 ENARSI) exam dumps with full confidence and pass exam.

300-410 Practice Questions

Question # 1

A newly Installeo router starts establishing an LDP session from another MPLS router to which it is not directly connected. Which LDP message type responds by target router to the Initiating router using UDP protocol?
A. notification message
B. session message
C. extended discovery message
D. advertisement message

C.
extended discovery message

Question # 2

Which IPv6 feature enables a device to reject traffic when it is originated from an address that is not stored in the device binding table?
A. IPv6 Snooping
B. IPv6 Source Guard
C. IPv6 DAD Proxy
D. IPv6 RA Guard

B.
IPv6 Source Guard

Question # 3

Which list defines the contents of an MPLS label?
A. 20-bit label; 3-bit traffic class; 1-bit bottom stack; 8-bit TTL
B. 32-bit label; 3-bit traffic class; 1-bit bottom stack; 8-bit TTL
C. 20-bit label; 3-bit flow label; 1-bit bottom stack; 8-bit hop limit
D. 32-bit label; 3-bit flow label; 1-bit bottom stack; 8-bit hop limit

A.
20-bit label; 3-bit traffic class; 1-bit bottom stack; 8-bit TTL

Explanation: The first 20 bits constitute a label, which can have 2^20 values. Next comes 3 bit value called Traffic Class. It was formerly called as experimental (EXP) field. Now it has been renamed to Traffic Class (TC). This field is used for QoS related functions.
Ingress router can classify the packet according to some criterion and assign a 3 bit value to this filed. If an incoming packet is marked with some IP Precedence or DSCP value and the ingress router may use such a field to assign an FEC to the packet. Next bit is Stack bit which is called bottom-of-stack bit. This field is used when more than one label is assigned to a packet, as in the case of MPLS VPNs or MPLS TE. Next byte is MPLS TTL field which serves the same purpose as that of IP TTL byte in the IP header

Question # 4

Which command allows traffic to load-balance in an MPLS Layer 3 VPN configuration?
A. multi-paths eibgp 2
B. maximum-paths 2
C. Maximum-paths ibgp 2
D. multi-paths 2

C.
Maximum-paths ibgp 2

Question # 5

Refer to Exhibit. The network administrator configured the branch router for IPv6 on the E0/0 interface. The neighboring router is fully configured to meet requirements, but the neighbor relationship is not coming up. Which action fixes the problem on the branch router to bring the IPv6 neighbors up?
A. Enable the IPv4 address family under the router ospfv3 4 process by using the addressfamily ipv4 unicast command
B. Disable IPv6 on the E0/0 interface using the no ipv6 enable command
C. Enable the IPv4 address family under the E0/0 interface by using the address-family ipv4 unicast command
D. Disable OSPF for IPv4 using the no ospfv3 4 area 0 ipv4 command under the E0/0 interface

A.
Enable the IPv4 address family under the router ospfv3 4 process by using the addressfamily ipv4 unicast command

Question # 6

An engineer configured policy-based routing for a destination IP address that does not exist in the routing table. How is the packet treated through the policy for configuring the set ip default next-hop command?
A. Packets are not forwarded to the specific next hop
B. Packets are forwarded based on the routing table
C. Packets are forwarded based on a static route
D. Packets are forwarded to the specific next hop

D.
Packets are forwarded to the specific next hop

Question # 7

Refer to the exhibit. The administrator noticed that the connection was flapping between the two ISPs instead of switching to ISP2 when the ISP1 failed. Which action resolves the issue?
A. Include a valid source-interface keyword in the icmp-echo statement.
B. Reference the track object 1 on the default route through ISP2 instead of ISP1.
C. Modify the static routes to refer both to the next hop and the outgoing intertace.
D. Modify the threshold to match the administrative distance of the ISP2 route.

A.
Include a valid source-interface keyword in the icmp-echo statement.

Question # 8

A customer requested a GRE tunnel through the provider network between two customer sites using loopback to hide internal networks. Which configuration on R2 establishes the tunnel with R1?
A. R2(config)# interface Tunnel 1 R2(config-if)# ip address 172.20.1.2 255.255.255.0 R2(config-if)# ip mtu 1400 R2(config-if)# ip tcp adjust-mss 1360 R2(config-if)# tunnel source 192.168.20.1 R2(config-if)# tunnel destination 192.168.10.1
B. R2(config)# interface Tunnel 1 R2(config-if)# ip address 172.20.1.2 255.255.255.0 R2(config-if)# ip mtu 1400 R2(config-if)# ip tcp adjust-mss 1360 R2(config-if)# tunnel source 10.10.2.2 R2(config-if)# tunnel destination 10.10.1.1
C. R2(config)# interface Tunnel 1 R2(config-if)# ip address 172.20.1.2 255.255.255.0 R2(config-if)# ip mtu 1500 R2(config-if)# ip tcp adjust-mss 1360 R2(config-if)# tunnel source 192.168.20.1 R2(config-if)# tunnel destination 10.10.1.1
D. R2(config)# interface Tunnel 1 R2(config-if)# ip address 172.20.1.2 255.255.255.0 R2(config-if)# ip mtu 1500 R2(config-if)# ip tcp adjust-mss 1360 R2(config-if)# tunnel source 10.10.2.2 R2(config-if)# tunnel destination 10.10.1.1

D.
R2(config)# interface Tunnel 1
R2(config-if)# ip address 172.20.1.2 255.255.255.0
R2(config-if)# ip mtu 1500
R2(config-if)# ip tcp adjust-mss 1360
R2(config-if)# tunnel source 10.10.2.2
R2(config-if)# tunnel destination 10.10.1.1

Up-to-Date 300-410 Exam Dumps
Valid Questions Answers
Implementing Cisco Enterprise Advanced Routing and Services (300-410 ENARSI) PDF & Online Test Engine Format
3 Months Free Updates
Dedicated Customer Support
CCNP Enterprise Pass in 1 Day For Sure
SSL Secure Protected Site
Exam Passing Assurance
98% 300-410 Exam Success Rate
Valid for All Countries

Cisco 300-410 Exam Dumps

Exam Name: Implementing Cisco Enterprise Advanced Routing and Services (300-410 ENARSI)
Certification Name: CCNP Enterprise

Cisco 300-410 exam dumps are created by industry top professionals and after that its also verified by expert team. We are providing you updated Implementing Cisco Enterprise Advanced Routing and Services (300-410 ENARSI) exam questions answers. We keep updating our CCNP Enterprise practice test according to real exam. So prepare from our latest questions answers and pass your exam.

Total Questions: 575
Last Updation Date: 16-Jan-2025

Up-to-Date

We always provide up-to-date 300-410 exam dumps to our clients. Keep checking website for updates and download.

Excellence

Quality and excellence of our Implementing Cisco Enterprise Advanced Routing and Services (300-410 ENARSI) practice questions are above customers expectations. Contact live chat to know more.

Success

Your SUCCESS is assured with the 300-410 exam questions of passin1day.com. Just Buy, Prepare and PASS!

Quality

All our braindumps are verified with their correct answers. Download CCNP Enterprise Practice tests in a printable PDF format.

Basic

$80

Any 3 Exams of Your Choice

3 Exams PDF + Online Test Engine

Buy Now

Premium

$100

Any 4 Exams of Your Choice

4 Exams PDF + Online Test Engine

Buy Now

Gold

$125

Any 5 Exams of Your Choice

5 Exams PDF + Online Test Engine

Buy Now

About
Info
Related Exams

Passin1Day has a big success story in last 12 years with a long list of satisfied customers.

We are UK based company, selling 300-410 practice test questions answers. We have a team of 34 people in Research, Writing, QA, Sales, Support and Marketing departments and helping people get success in their life.

We dont have a single unsatisfied Cisco customer in this time. Our customers are our asset and precious to us more than their money.

300-410 Dumps

We have recently updated Cisco 300-410 dumps study guide. You can use our CCNP Enterprise braindumps and pass your exam in just 24 hours. Our Implementing Cisco Enterprise Advanced Routing and Services (300-410 ENARSI) real exam contains latest questions. We are providing Cisco 300-410 dumps with updates for 3 months. You can purchase in advance and start studying. Whenever Cisco update Implementing Cisco Enterprise Advanced Routing and Services (300-410 ENARSI) exam, we also update our file with new questions. Passin1day is here to provide real 300-410 exam questions to people who find it difficult to pass exam

CCNP Enterprise can advance your marketability and prove to be a key to differentiating you from those who have no certification and Passin1day is there to help you pass exam with 300-410 dumps. Cisco Certifications demonstrate your competence and make your discerning employers recognize that Implementing Cisco Enterprise Advanced Routing and Services (300-410 ENARSI) certified employees are more valuable to their organizations and customers.

We have helped thousands of customers so far in achieving their goals. Our excellent comprehensive Cisco exam dumps will enable you to pass your certification CCNP Enterprise exam in just a single try. Passin1day is offering 300-410 braindumps which are accurate and of high-quality verified by the IT professionals.

Candidates can instantly download CCNP Enterprise dumps and access them at any device after purchase. Online Implementing Cisco Enterprise Advanced Routing and Services (300-410 ENARSI) practice tests are planned and designed to prepare you completely for the real Cisco exam condition. Free 300-410 dumps demos can be available on customer’s demand to check before placing an order.

300-415 Dumps 300-420 Dumps 300-425 Dumps 300-430 Dumps 300-435 Dumps 300-440 Dumps 350-401 Dumps

Why Buy 300-410 Exam Dumps From Passin1Day?

300-410 Practice Questions

C.
extended discovery message

B.
IPv6 Source Guard

A.
20-bit label; 3-bit traffic class; 1-bit bottom stack; 8-bit TTL

C.
Maximum-paths ibgp 2

A.
Enable the IPv4 address family under the router ospfv3 4 process by using the addressfamily ipv4 unicast command

D.
Packets are forwarded to the specific next hop

A.
Include a valid source-interface keyword in the icmp-echo statement.

D.
R2(config)# interface Tunnel 1
R2(config-if)# ip address 172.20.1.2 255.255.255.0
R2(config-if)# ip mtu 1500
R2(config-if)# ip tcp adjust-mss 1360
R2(config-if)# tunnel source 10.10.2.2
R2(config-if)# tunnel destination 10.10.1.1

Cisco 300-410 Exam Dumps

PDF Price

Engine Price

PDF + Engine

Up-to-Date

Excellence

Success

Quality

$80

$100

$125

About Us

WE FEEL SATISFIED WHEN YOU GET SATISFIED!

300-410 Dumps

What Our Customers Say

Jeff Brown

Mareena Frederick

Ralph Donald

Lilly Solomon

Why Buy 300-410 Exam Dumps From Passin1Day?

300-410 Practice Questions

C. extended discovery message

B. IPv6 Source Guard

A. 20-bit label; 3-bit traffic class; 1-bit bottom stack; 8-bit TTL

C. Maximum-paths ibgp 2

A. Enable the IPv4 address family under the router ospfv3 4 process by using the addressfamily ipv4 unicast command

D. Packets are forwarded to the specific next hop

A. Include a valid source-interface keyword in the icmp-echo statement.

D. R2(config)# interface Tunnel 1R2(config-if)# ip address 172.20.1.2 255.255.255.0R2(config-if)# ip mtu 1500R2(config-if)# ip tcp adjust-mss 1360R2(config-if)# tunnel source 10.10.2.2R2(config-if)# tunnel destination 10.10.1.1

Cisco 300-410 Exam Dumps

PDF Price

Engine Price

PDF + Engine

Up-to-Date

Excellence

Success

Quality

$80

$100

$125

About Us

WE FEEL SATISFIED WHEN YOU GET SATISFIED!

300-410 Dumps

What Our Customers Say

Jeff Brown

Mareena Frederick

Ralph Donald

Lilly Solomon

C.
extended discovery message

B.
IPv6 Source Guard

A.
20-bit label; 3-bit traffic class; 1-bit bottom stack; 8-bit TTL

C.
Maximum-paths ibgp 2

A.
Enable the IPv4 address family under the router ospfv3 4 process by using the addressfamily ipv4 unicast command

D.
Packets are forwarded to the specific next hop

A.
Include a valid source-interface keyword in the icmp-echo statement.

D.
R2(config)# interface Tunnel 1
R2(config-if)# ip address 172.20.1.2 255.255.255.0
R2(config-if)# ip mtu 1500
R2(config-if)# ip tcp adjust-mss 1360
R2(config-if)# tunnel source 10.10.2.2
R2(config-if)# tunnel destination 10.10.1.1