Black Friday

Why Buy NSE6_FAZ-7.2 Exam Dumps From Passin1Day?

Having thousands of NSE6_FAZ-7.2 customers with 99% passing rate, passin1day has a big success story. We are providing fully Fortinet exam passing assurance to our customers. You can purchase Fortinet NSE 6 - FortiAnalyzer 7.2 Administrator exam dumps with full confidence and pass exam.

NSE6_FAZ-7.2 Practice Questions

Question # 1
What is the best approach to handle a hard disk failure on a FortiAnalyzer that supports hardware RAID?
A. Shul down FortiAnalyzer and replace the disk.
B. Perform a hot swap of the disk.
C. Run execute format disk to format and restart the FortiAnalyzer device.
D. There is no need to do anything because the disk will self-recover.


B. Perform a hot swap of the disk.

Explanation:

In systems that support hardware RAID, hot swapping allows for the replacement of a failed disk without shutting down the system. This capability is crucial for maintaining uptime and ensuring data redundancy and availability, especially in critical environments. The RAID controller rebuilds the data on the new disk using redundancy data from the other disks in the array, ensuring no data loss and minimal impact on system performance.

In the context of a FortiAnalyzer unit equipped with hardware RAID support, the optimal approach to addressing a hard disk failure is to perform a hot swap of the disk. Hardware RAID configurations are designed to provide redundancy and fault tolerance, allowing for the replacement of a failed disk without the need to shut down the system. Hot swapping enables the administrator to replace the faulty disk with a new one while the system is still running, and the RAID controller will rebuild the data on the new disk, restoring the RAID array to its fully operational state.

References:

FortiAnalyzer 7.2 Administrator Guide - "Hardware Maintenance" and "RAID Management" sections.

Question # 2
Which statement is true about using aggregation mode on FortiAnalyzer?
A. Aggregation mode supports log filters.
B. Aggregation mode can work with syslog servers.
C. In aggregation mode, logs and content files are forwarded in real time.
D. Aggregation mode can be configured only on the CLI.


B. Aggregation mode can work with syslog servers.

Explanation:

In aggregation mode, FortiAnalyzer stores logs received from devices and forwards them at a specified time each day to avoid duplication. It is specifically designed to work between two FortiAnalyzer units and does not support syslog or CEF servers. Additionally, aggregation mode configurations are limited to CLI commandslog-forwardandlog-forward-service.

References:

FortiAnalyzer 7.2 Administrator Guide, "Aggregation" and "CLI Commands for Aggregation Mode" sections.

Question # 3
A rogue administrator was accessing FortiAnalyzer without permission. Where can you view the activities that the rogue administrator performed on FortiAnalyzer?
A. FortiView
B. Fabric View
C. Log View
D. System Settings


A. FortiView

Explanation:

To monitor the activities performed by any administrator, including a rogue one, on the FortiAnalyzer, you should use the FortiView feature. FortiView provides a comprehensive overview of the activities and events happening within the FortiAnalyzer environment, including administrator actions, making it the appropriate tool for tracking unauthorized or suspicious activities.

References:

FortiAnalyzer 7.4.1 Administration Guide, "System Settings > Fabric Management" section.


Question # 4
Which FortiAnalyzer command erases all device settings, images, databases, and logs on disk, but preserves The network configuration?
A. executefactory-reset
B. executeformat disk
C. executeformatlogdisk
D. executereset all-except—ip


A. executefactory-reset

Explanation:

The FortiAnalyzer commandexecute factory-resetis used to erase all device settings, images, databases, and logs on disk but preserves the current IP address and route information. This command effectively resets the FortiAnalyzer to its factory settings while maintaining its network configuration, allowing it to be quickly reconfigured with the same network settings.

References:

FortiAnalyzer 7.4.1 Administration Guide, "Reset Commands" section.


Question # 5
After you have moved a registered logging device out of one ADOM and into a new ADOM, you run the following command: execute sql-local rebuild-adom What is the purpose of running this CLI command?
A. To reset the ADOM disk quota enforcement to its default value
B. To migrate the archive logs to the new ADOM
C. To populate the new ADOM with analytical logs for the moved device, so you can run reports
D. To remove the analytics logs of the device from the old database
Explanation:

When you move a registered logging device from one ADOM (Administrative Domain) to another in FortiAnalyzer, it's essential to ensure that the analytical logs for the moved device are available in the new ADOM to maintain continuity in reporting and log analysis. The commandexecute sql-local rebuild-adom is used specifically for this purpose. Running this command populates the new ADOM with the analytical logs of the moved device, enabling you to generate accurate and comprehensive reports based on the historical data of the device in its new ADOM context. This process ensures that the transition of devices between ADOMs does not lead to a loss of analytical insight or reporting capabilities for the device's traffic and events.


Question # 6
In a Fortinet Security Fabric, what can make an upstream FortiGate create traffic logs associated with sessions initiated on downstream FortiGate devices?
A. The traffic destination is another FoitiGate in the fabric.
B. Log redundancy is configured in the fabric.
C. The upstream FortiGate is configured to do NAT.
D. The downstream device cannot connect to FortiAnalyzer.


D. The downstream device cannot connect to FortiAnalyzer.


Question # 7
What is true about a FortiAnalyzer Fabric?
A. Supervisors support HA.
B. Members events can be raised from the supervisor.
C. The supervisor and members cannot be in different time zones
D. The members send their logs to the supervisor.


D. The members send their logs to the supervisor.

Explanation:

In a FortiAnalyzer Fabric, the FortiAnalyzer can recognize a Security Fabric group of devices, and it supports the Security Fabric by storing and analyzing logs from these units as if they were from a single device. The members of the Security Fabric group send their logs to the FortiAnalyzer, which acts as a supervisor for log storage and analysis, providing a centralized point of visibility and control over the logs.

References:

FortiAnalyzer 7.4.1 Administration Guide, "Security Fabric" section.


Question # 8
Which two statements about FortiAnalyzer operating modes are true? (Choose two.)
A. When in collector mode. FortiAnalyzer offloads the log receiving task to the analyzer.
B. Analyzer mode is the default operating mode.
C. For the collector, you should allocate most of the disk space to analytics logs.
D. When in analyzer mode. FortiAnalyzer supports event management and reporting features.


B. Analyzer mode is the default operating mode.

D. When in analyzer mode. FortiAnalyzer supports event management and reporting features.

Explanation:

The default operating mode for FortiAnalyzer is analyzer mode. In this mode, FortiAnalyzer provides full functionality for event management and reporting features. This mode is intended for environments where comprehensive analysis and reporting are required. It allows FortiAnalyzer to collect, analyze, and store logs, as well as generate reports and manage events.

References:

FortiAnalyzer 7.4.1 Administration Guide, "Operating modes" section.

NSE6_FAZ-7.2 Dumps
  • Up-to-Date NSE6_FAZ-7.2 Exam Dumps
  • Valid Questions Answers
  • Fortinet NSE 6 - FortiAnalyzer 7.2 Administrator PDF & Online Test Engine Format
  • 3 Months Free Updates
  • Dedicated Customer Support
  • NSE 6 Network Security Specialist Pass in 1 Day For Sure
  • SSL Secure Protected Site
  • Exam Passing Assurance
  • 98% NSE6_FAZ-7.2 Exam Success Rate
  • Valid for All Countries

Fortinet NSE6_FAZ-7.2 Exam Dumps

Exam Name: Fortinet NSE 6 - FortiAnalyzer 7.2 Administrator
Certification Name: NSE 6 Network Security Specialist

Fortinet NSE6_FAZ-7.2 exam dumps are created by industry top professionals and after that its also verified by expert team. We are providing you updated Fortinet NSE 6 - FortiAnalyzer 7.2 Administrator exam questions answers. We keep updating our NSE 6 Network Security Specialist practice test according to real exam. So prepare from our latest questions answers and pass your exam.

  • Total Questions: 30
  • Last Updation Date: 20-Nov-2024

PDF Price

$19.99
$55.99 Updates:

Engine Price

$25.99
$73.99 Updates:

PDF + Engine

$29.99
$84.99 Updates:


Up-to-Date

We always provide up-to-date NSE6_FAZ-7.2 exam dumps to our clients. Keep checking website for updates and download.

Excellence

Quality and excellence of our Fortinet NSE 6 - FortiAnalyzer 7.2 Administrator practice questions are above customers expectations. Contact live chat to know more.

Success

Your SUCCESS is assured with the NSE6_FAZ-7.2 exam questions of passin1day.com. Just Buy, Prepare and PASS!

Quality

All our braindumps are verified with their correct answers. Download NSE 6 Network Security Specialist Practice tests in a printable PDF format.

Basic

$80

Any 3 Exams of Your Choice

3 Exams PDF + Online Test Engine

Buy Now
Premium

$100

Any 4 Exams of Your Choice

4 Exams PDF + Online Test Engine

Buy Now
Gold

$125

Any 5 Exams of Your Choice

5 Exams PDF + Online Test Engine

Buy Now

About Us

Passin1Day has a big success story in last 12 years with a long list of satisfied customers.

We are UK based company, selling NSE6_FAZ-7.2 practice test questions answers. We have a team of 34 people in Research, Writing, QA, Sales, Support and Marketing departments and helping people get success in their life.

We dont have a single unsatisfied Fortinet customer in this time. Our customers are our asset and precious to us more than their money.

WE FEEL SATISFIED WHEN YOU GET SATISFIED!

NSE6_FAZ-7.2 Dumps

We have recently updated Fortinet NSE6_FAZ-7.2 dumps study guide. You can use our NSE 6 Network Security Specialist braindumps and pass your exam in just 24 hours. Our Fortinet NSE 6 - FortiAnalyzer 7.2 Administrator real exam contains latest questions. We are providing Fortinet NSE6_FAZ-7.2 dumps with updates for 3 months. You can purchase in advance and start studying. Whenever Fortinet update Fortinet NSE 6 - FortiAnalyzer 7.2 Administrator exam, we also update our file with new questions. Passin1day is here to provide real NSE6_FAZ-7.2 exam questions to people who find it difficult to pass exam

NSE 6 Network Security Specialist can advance your marketability and prove to be a key to differentiating you from those who have no certification and Passin1day is there to help you pass exam with NSE6_FAZ-7.2 dumps. Fortinet Certifications demonstrate your competence and make your discerning employers recognize that Fortinet NSE 6 - FortiAnalyzer 7.2 Administrator certified employees are more valuable to their organizations and customers.


We have helped thousands of customers so far in achieving their goals. Our excellent comprehensive Fortinet exam dumps will enable you to pass your certification NSE 6 Network Security Specialist exam in just a single try. Passin1day is offering NSE6_FAZ-7.2 braindumps which are accurate and of high-quality verified by the IT professionals.

Candidates can instantly download NSE 6 Network Security Specialist dumps and access them at any device after purchase. Online Fortinet NSE 6 - FortiAnalyzer 7.2 Administrator practice tests are planned and designed to prepare you completely for the real Fortinet exam condition. Free NSE6_FAZ-7.2 dumps demos can be available on customer’s demand to check before placing an order.


What Our Customers Say

Testimonial

Jeff Brown

Thanks you so much passin1day.com team for all the help that you have provided me in my Fortinet exam. I will use your dumps for next certification as well.
Testimonial

Mareena Frederick

You guys are awesome. Even 1 day is too much. I prepared my exam in just 3 hours with your NSE6_FAZ-7.2 exam dumps and passed it in first attempt :)
Testimonial

Ralph Donald

I am the fully satisfied customer of passin1day.com. I have passed my exam using your Fortinet NSE 6 - FortiAnalyzer 7.2 Administrator braindumps in first attempt. You guys are the secret behind my success ;)
Testimonial

Lilly Solomon

I was so depressed when I get failed in my Cisco exam but thanks GOD you guys exist and helped me in passing my exams. I am nothing without you.